Disaster and Crisis Management Plan
1.
Make sure
the radio is turned on and the volume is turned up.
2.
Use the
up and down arrow buttons on the left side of the screen to select the correct
frequency. If a crisis has been
declared, press the P2 button below
the screen to immediately access the Emergency frequency (Blue, # 1), or you may
use the up and down buttons.
3.
Depress
the side broadcast button and hold it down while you speak.
4.
Speak
your message, and then release the side broadcast button.
5.
With the
side broadcast button released, you will be able to hear what others are
broadcasting.
6.
You may
also use the P3 button to scan all frequencies except Yellow.
The scanner will stop on a broadcast on any frequency, and then continue
to scan other frequencies. If you
choose to broadcast when the scanner stops for another person’s broadcast, the
scanner ceases and remains on that frequency.
You may manually stop the scanner by pressing the P3 button a second
time.
|
|
